Table of Contents
Advertisement
Positioning the speaker
The supplied satellite speakers are all of the same functionality,
so use two as the front left/right speakers, and two as the
surround left/right speakers.
Front left/right speakers D-120 and a center speaker
D-120C
These three speakers should be placed in front of the listener.
• All three speakers should be placed at the same level.
• Placement should be such so that the speakers all aim at
the ears of the listener when the listener is listening to
music or watching the screen. The center speakers
enhance the sound effects from the two front speakers and
add clarity to movements in the sound for a much richer
sound image.
Surround left/right speakers D-120
Surround speakers should be placed to the side of the listener
or behind the listener. These speakers produce sound
movements in all directions, create a sound environment that
reflects the background, and create the sensation of being in
the middle of the action.
Subwoofer SKW-120
The subwoofer can be installed anywhere in the room, but in
most situations you will obtain the best results by placing the
subwoofer to the side near a corner of the room. The quality
and level of the bass sounds from the subwoofer will differ
depending on the location where the subwoofer is placed and
the layout of the room, so it is recommended to place the
subwoofer in several locations and find the position that
provides the best results.
Sub-
woofer
(SKW-120)
Surround
left
speaker
(D-120)
TV or Screen
Center
speaker
(D-120C)
Listener
Surround
right
speaker
(D-120)
Volume adjustment
Adjusting the volume
OUTPUT LEVEL
MIN
Recommended level for the HTP-120 package system
Use the volume (OUTPUT LEVEL) knob on the back of the
subwoofer and adjust the level to the desired level in accordance
with the layout of your room and the positioning of all your
components. If the volume of the subwoofer is not set to proper
level, distortions in the playback characteristics can result.
Note:
Make sure that the input level does not reach excessive level.
The HTP-120 is designed for playing back music at a normal
volume, but if the input level is set to enormous levels, it may
damage the speakers. Also, always first lower the volume at
the amplifier before changing the settings of any switches to
prevent accidental damage.
MAX
7
Advertisement
Table of Contents
