Updating Multiple Devices - Digi Connect Sensor Firmware Update

With telit modem

Hide thumbs Also See for Connect Sensor:

Table of Contents

Update the cellular modem firmware over the air (FOTA)

The next time the Connect Sensor+ is scheduled to connect to Remote Manager, it will start the

firmware update process. To cause the device to connect immediately, press the Wake button on the

device.

Once started, the update will take a few minutes to complete. After the device completes the update,

it will reconnect to the Remote Manager the next time it is scheduled to do so.

Updating multiple devices

The above example shows how to update a single Connect Sensor+. More than one device can be

updated with a single Remote Manager request.

To update a list of devices, add their device IDs to <targets> in the request. For example:

</targets>

To update all devices in a Remote Manager group, add the group name to <targets>.

For example:

</targets>

Digi Connect® Sensor Telit Modem Firmware Update

Step 4: Initiate the firmware update

Table of Contents

Do you have a question about the Connect Sensor and is the answer not in the manual?

Connect sensor+