Table of Contents
Advertisement
When the batteries are recharging, the Battery Charge LED on the front panel
will turn on steady.
The LED will blink in the following situations:
• pre-charge of very low batteries
• temperature is too low or too high
• batteries are damaged
When the charge is complete, the LED will turn off.
If the batteries need to be replaced, they must be replaced with NiMH
rechargeable batteries. Battery charge life is guaranteed for same-capacity
batteries (in mA·h) as those shipped with the oscilloscope.
To remove the battery cover, use a coin to turn the slot on the back of the unit
counter-clockwise.
Description
The Handscope Oscilloscope Model OX5042B combines three instruments into
one:
• 40 MHz oscilloscope
• Independent 8000 ct multimeter with power measurements
• Built-in harmonic analyzer out to the 31
40 and 450 Hz)
The instrument operates at a constant acquisition depth of 2500 points.
An LCD TFT screen is used to view the applied signals along with all the setting
parameters.
The main command functions are accessible using the buttons on the front
panel.
A graphic interface is used to:
adjust the parameters related to the selected button
■
navigate using a horizontal main menu showing the current settings and
■
vertical sub-menus
Handscope Harmonic Analyzer Oscilloscope Model OX 5042B
harmonic (fundamental between
st
9
Advertisement
Table of Contents
