Safety Notes - Siemens SIMATIC NET PS598-1 Compact Operating Instructions

Safety notes

To prevent injury and damage, read the manual before using the device.
Safety notices on the use of the devices
The following safety notices must be adhered to when setting up and operating the device and
during all work relating to it such as installation, connecting up, replacing devices or opening the
device.
Important notices 100 to 240 VAC
Danger from line voltage
Devices with this mark have a 100 to 240 VAC power supply.
This product can only function correctly and safely if it is transported, stored, set up, and
installed correctly, and operated and maintained as recommended.
Connecting and disconnecting may only be performed by an electrical specialist. Connect or
disconnect power supply cables only when the power is turned off!
General notices
Opening the device
Do not open when energized. Note that this does not apply to opening the panel in the housing.
Power supply unit PS598-1 for SCALANCE XR-500
Compact Operating Instructions, 02/2023, A5E03275848-05
CAUTION
DANGER
WARNING
2
7