Using Top Tether - Harmony COMMANDER Instruction Manual

3. Buckle the vehicle seat belt. The
vehicle seat belt MUST NoT be
twisted.
To engage vehicle seat belt retractor:
4. Pull out the full length of the seat
belt (until you cannot pull out any
more slack). This locks the retractor.
5. Tighten vehicle seat belt by
placing your knee on the seat
base and by using your full weight
to push the child restraint down
❸ as you simultaneously release
the extra belt length until seat
belt is taunt and has no slack ❹.
6. The locked seat belt retractor
will not allow you to add any
length to the belt until you
unbuckle the seat belt.
For more information on how to tighten the belt for
your seat belt system, see your vehicle owner's manual.
7. Secure the top of the child restraint using the top
tether strap (see section "Using Top Tether").
! THe ToP TeTHer MUST Be USed AT ALL TIMeS WHeN
USING CHILd reSTrAINT IN HArNeSS Mode. Using
your child restraint with the Top Tether strap properly
anchored to the vehicle, as indicated in these instructions,
may reduce the chance and severity of injury or death to
your child in the event of a sudden stop or crash.
All UAS seating positions have Top Tether anchors. Check
your vehicle owner's manual for Top Tether anchor
locations. If your vehicle is not equipped with a Top
Tether anchor, it may be possible to have one installed.
Contact your vehicle dealership or a certified mechanic
for the proper anchor location and installation.

USING ToP TeTHer

❸
❹
28