Controlling The Camera - dji GOGGLES INTEGRA MOTION COMBO User Manual

The flying speed controlled by the joystick and the accelerator can be configured
as below:
1. Press down the 5D button to open the menu from the FPV view
2. Select Settings > Control > Motion Controller > Gain Tuning, then set the
maximum speed in each direction.

Controlling the Camera

FN Dial
Adjusting the camera parameters: press the dial to open the camera settings panel from
the FPV view of the goggles. Scroll the dial to navigate the settings menu or adjust the pa-
rameter value, then press the dial to confirm the selection. Press and hold the dial to exit
the current menu.
Controlling the camera tilt: before takeoff or during RTH and landing, press and hold the
dial from the FPV view and then scroll up or down to tilt the camera. Release the dial to
stop the camera tilt.
Shutter/Record Button
Press and hold to switch between the photo and video modes. Press once to take a photo
or to start or stop recording.
DJI Goggles Integra Motion Combo User Manual
FN Dial
Shutter/Record Button
©
2023 DJI All Rights Reserved.
29