Activation - dji GOGGLES INTEGRA MOTION COMBO User Manual

DJI Goggles Integra Motion Combo User Manual
If the battery level is low, it is recommended to use a charger that supports 5 V, 2 A out-
put to charge the device.
Make sure that the default output voltage of the charger is 5 V. Excessive voltage
will damage the device.
The table below shows the battery level LED status during charging.
LEDs

Activation

Activate and update the firmware before using the device for the first time.
Connect the USB-C port of the goggles to the mobile device, and run the DJI Fly app. Fol-
low the on-screen instructions to activate the device and update the firmware. Make sure
the mobile device is connected to the internet during activation.
14
©
2023 DJI All Rights Reserved.
5V, 2A
Battery Level
1%-50%
51%-75%
76%-99%
100%
DJI Fly
App