Table of Contents
Advertisement
US Type Charger 80A
Keep any packing materials away from children – these materials
are potential source of danger, e.g. suffocation.
CAUTION: Cord extension sets are not allowed to be used.
The charge point must be installed only by a licensed electrician in
accordance with the provisions of the local electrical industry construction
and should comply with National Electrical Codes and standards.
Before installing the charge point, make sure you have read all of these
instructions in this manual and fully understand its contents.
Appropriate protection is required when connecting to a main switchboard.
The tools and parts used as outlined in the section "Tools & parts required
for installation".
3.1.2 Grounding instructions
The charge point must have equipment grounding through a permanent
wiring system or an equipment grounding conductor. Use a wire with a
dedicated grounding wire and a ring terminal and connect to the equipment
ground terminal block for grounding.
3.2 Tools
installation
Table 3-1 Tools & parts required for installation
Tool
Mounting
Bracket
Holster
ASSY
Screw
Wire,
Copper
&
Qty
Model
1
All
1
All
4
All
1
All
3
All
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
parts
Incl.
Size
222x173x9
Yes
mm
58x58x70
Yes
mm
Tapping:
Yes
#12
Mechanical
Yes
: M6
Mechanical
Yes
: M6
2 AWG x 2,
No
8AWG x 1
(for
required
Remark
Fasten charge point to
the wall.
Hold EV charging plug
Fasten Mounting
Bracket & Holster
Fasten charge point &
Mount Bracket
Installation Manual
for
14
Advertisement
Table of Contents
