Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TW Audio WHF
Summary of Contents for TW Audio WHF
- Page 1 Assembly Instructions...
- Page 2 If you lend your product to another party, inform that party of the safety-related operating pro- cedures and hand over this assembly guide. If you require additional copies of this manual, you can obtain them free of charge from TW AUDiO or download them from www.twaudio.de Instructions in this user manual...
- Page 3 Assembly Instructions WHF Notes on the products Before using the device, carefully read the assembly instructions and keep it with the Read manual WHF wall mount flat. before use! General information Assembly instructions: OM-WHF Version 2.0 en, 03/2023 © by TWAMBO 2023; all rights reserved.
-
Page 4: Table Of Contents
Necessary tools for setting up the flown system ............9 Preparing the B14i loudspeaker ................10 Preparing the WHF wall mount flat ................. 12 Mounting the speaker plate to the B14i loudspeaker ..........13 Mounting the centering as well as pressure plate to the B14i loudspeaker ..... 14 Mounting the wall plate to different construction forms of a wall ...... -
Page 5: Safety | Intended Use
Damage caused by improper use is not covered by TWAMBO. Before every operation, check the scope of delivery of the WHF wall mount flat for its com- pleteness and ensure that all parts are in perfect condition. The scope of delivery includes specified components. Only use the recommended and cer- WARNING tified components. - Page 6 Assembly Instructions WHF The payload of the WHF wall mount flat is designed of not more than one B14i loudspeaker. Do not exceed this payload. WARNING Before mounting the WHF wall mount flat check that walls are capable to carrying the pay- load of the components.
-
Page 7: Overview
Assembly Instructions WHF 2. Overview Components Figure 2.1 - Overview Hexagon head screw M10 x 30 ................. 1 piece Pan head screw with flange M6 x 18 ............... 4 pieces Pan head screw without flange M6 x 16 ............2 pieces Pressure plate .................... -
Page 8: Technical Data
Assembly Instructions WHF 3. Technical data Data sheet Maximum load capacity 1x B14i Dimensions (h x w x d) 232 x 275 x 21 mm [9.13 x 10.83 x 0.83 in] Weight 1,7 kg [3.75 lbs] Surface Powder-coated Description of the plates from the scope of delivery... -
Page 9: Commissioning
The WHF wall mount flat is designed for hanging operation on walls. Please note that setting up the system structures always requires two persons! WARNING TW AUDiO recommends using only the accessories specified by TW AUDiO for securing and mounting the wall mount slim. NOTE... -
Page 10: Preparing The B14I Loudspeaker
Assembly Instructions WHF Preparing the B14i loudspeaker Remove the M10 screw at the B14i loudspeaker. NOTE Figure 4.3.1 - Remove the M10 screw... - Page 11 Assembly Instructions WHF Then remove the four M6 screws from the B14i loudspeaker. NOTE Figure 4.3.2 - Remove the M6 screws...
-
Page 12: Preparing The Whf Wall Mount Flat
Assembly Instructions WHF Preparing the WHF wall mount flat Remove the two screws at the WHF wall mount flat. NOTE Figure 4.4.1 - Remove the two screws Remove the loudspeaker sheet metal. NOTE Figure 4.4.2 - Remove sheet metal... -
Page 13: Mounting The Speaker Plate To The B14I Loudspeaker
Mounting the speaker plate to the B14i loudspeaker Attach the loudspeaker plate (see figure 2.1, item 7) of the WHF wall mount flat to the B14i loudspeaker. Use the pan head screws with flange (see figure 2.1, item 2) from our scope of delivery. -
Page 14: Mounting The Centering As Well As Pressure Plate To The B14I Loudspeaker
Assembly Instructions WHF Mounting the centering as well as pressure plate to the B14i loudspeaker 1. First place the centering plate (see figure 2.1, item 5) into the large center hole of the loudspeaker plate that is already attached to the B14i loudspeaker. -
Page 15: Mounting The Wall Plate To Different Construction Forms Of A Wall
Assembly Instructions WHF Mounting the wall plate to different construction forms of a wall When attaching the wall plate (see figure 2.1, item 6), follow the instructions from chapter 1 - Safety / Intended use. WARNING addition, observe following instructions... -
Page 16: Hang Loudspeaker On Wall
Assembly Instructions WHF Hang loudspeaker on wall Carefully insert the loudspeaker plate on the B14i loudspeaker into the wall plate attached to the wall. WARNING Figure 4.8 - Insert loudspeaker plate with loudspeaker into wall plate... -
Page 17: Screwing The Plates Of The Whf
Assembly Instructions WHF Screwing the plates of the WHF Screw the two plates of the WHF wall mount flat using the two pan-head screws (see Figure 2.1, item 3). Use an extension for the bit insert for this purpose. WARNING... -
Page 18: Transport And Storage
Assembly Instructions WHF 5. Transport and storage Ensure that the surfaces of the parts of the wall mount flat are not damaged during transport and storage. Moisture may penetrate where steel surfaces are exposed by scratches and result in corrosion. -
Page 19: Ce Conformity Declaration
Assembly Instructions WHF 6. CE Conformity Declaration Copy and translation of the original CE Conformity Declaration: We hereby declare that the below-referenced components by virtue of their design and con- struction, and in the configuration placed on the market by us, satisfy the safety and health requirements of the applicable EC directives. - Page 20 Assembly Instructions WHF TWAMBO GmbH Karl-Hofer-Str. 42 14163 Berlin Germany Phone: + 49 (0) 71 41-48 89 89 0 Fax: + 49 (0) 71 41-48 89 89 99 E-Mail: info@twaudio.de WWW: www.twaudio.de...
Need help?
Do you have a question about the WHF and is the answer not in the manual?
Questions and answers