Page 2
Thank you for choosing a high-quality product “MADE IN GERMANY” from TW AUDiO. The FDB30 dolly is an accessory for the B30, VERA S30 or T24N loudspeaker. This accessory set is characterized by a subtle look, a remarkable size to weight ratio and ease of use.
3. Technical specifications ....................7 Data sheet ....................... 7 4. Commissioning ....................... 8 Using FDB30 dolly with B30 or VERA S30 loudspeaker ........... 8 Using FDB30 dolly with T24N loudspeaker ............10 5. Transport and Storage ....................12 6. CE Conformity Declaration .................... 13...
When moving the FDB30 dolly, ensure full load-bearing capacity and stability of the substrate. The FDB30 dolly is specified for a load of not more than one B30 or one VERA S30 or one T24N loudspeaker. This load capacity must never be exceeded!
Operating manual FDB30 3. Technical specifications Data sheet Maximum load capacity 1x B30 or 1x VERA S30 or 1x T24N Dimensions (h x w x d) 700 x 440 x 150 mm (27.5 x 17.3 x 5.9 in) Weight 7,4 kg (16 lbs)
Operating manual FDB30 4. Commissioning Using FDB30 dolly with B30 or VERA S30 loudspeaker Please note that two persons are always required to set up the FDB30 dolly with the B30 or VERA S30 loudspeaker! WARNING Place the B30 or VERA S30 loudspeaker sideways upright on the floor and position the FDB30 dolly so that the castors with stoppers are at the top.
Page 9
The FDB30 dolly can be stacked for storage. For this purpose, recesses (see figure 2.1 - Pos.5) are provided in the dolly (see figure 2.1 - Pos.1). When moving the stacked FDB30 dolly, note that there is a risk of tipping on each individual FDB30 dolly.
Operating manual FDB30 Using FDB30 dolly with T24N loudspeaker Please note that two persons are always required to set up the FDB30 dolly with the T24N loudspeaker! WARNING Place the T24N loudspeaker on the floor and position the FDB30 dolly so that the castors with stoppers are at the top.
Page 11
The FDB30 dolly can be stacked for storage. For this purpose, recesses (see figure 2.1 - Pos.5) are provided in the dolly (see figure 2.1 - Pos.1). When moving the stacked FDB30 dolly, note that there is a risk of tipping on each individual FDB30 dolly.
NOTE This is why the product should be transported in a safe, careful, dry and largely dust-free manner. The following transport and storage accessories are available from TW AUDiO: • CoverB30 (Protective cover) • CoverT24 (Protective cover) The original packaging is not suitable as permanent storage and transport packaging.
Operating manual FDB30 6. CE Conformity Declaration Copy and translation of the original CE Conformity Declaration: We hereby declare that the below-referenced components by virtue of their design and construction, and in the configuration placed on the market by us, satisfy the safety and health requirements of the applicable EC directives.
Need help?
Do you have a question about the FDB30 and is the answer not in the manual?
Questions and answers