Grundfos CIM 280-EU GIC Gen2 Instructions Manual
Grundfos CIM 280-EU GIC Gen2 Instructions Manual

Grundfos CIM 280-EU GIC Gen2 Instructions Manual

Cellular modules
Hide thumbs Also See for CIM 280-EU GIC Gen2:

Advertisement

Quick Links

CIM 280-EU GIC Gen2 and CIM 280-US GIC Gen2
cellular modules
Installation and operating instructions
CIM 280 EU/US cellular module
Installation and operating instructions
(all available languages)
http://net.grundfos.com/qr/i/92500064
GRUNDFOS INSTRUCTIONS

Advertisement

Table of Contents
loading

Summary of Contents for Grundfos CIM 280-EU GIC Gen2

  • Page 1 GRUNDFOS INSTRUCTIONS CIM 280-EU GIC Gen2 and CIM 280-US GIC Gen2 cellular modules Installation and operating instructions CIM 280 EU/US cellular module Installation and operating instructions (all available languages) http://net.grundfos.com/qr/i/92500064...
  • Page 3 CIM 280-EU GIC Gen2 and CIM 280-US GIC Gen2 cellular modules English (GB) Installation and operating instructions ........5 Български...
  • Page 4 Uppsetningar- og notkunarleiðbeiningar ....... 381 CIM 280-EU GIC Gen2 and CIM 280-US GIC Gen2 cellular modules...
  • Page 5: Table Of Contents

    1.1 Hazard statements Table of contents The symbols and hazard statements below may appear in Grundfos installation and operating General information ... . . 5 instructions, safety instructions and service Hazard statements .
  • Page 6: Product Introduction

    4G data and international PDU SMS. Information about how to mount a CIM interface into a Grundfos product is described in the I&O manual of the product itself. The CIM 280 cellular module makes it possible to...
  • Page 7: Leds

    Pulsating pulse) communication to yellow (single Cellular network active. product is lost. pulse) Product profile not Permanently Data exchange to Grundfos downloaded from green iSolutions Cloud. Pulsating red (single Grundfos Remote For future use. pulse) Management/ Grundfos iSolutions For future use.
  • Page 8 Firmware upgrade, LED1 and LED2 RS-485 Modbus master, LED3 Pos. Colour Description Pos. Colour Description LED colour. LED colour. Green LED colour. Green LED colour. RS-485 is not used: LED is off. Flashing red and Firmware upgrade in green progress, LED2. RS-485 Modbus RTU Pulsating red (single (Master): communica...
  • Page 9: Installation Requirements

    3. Installation requirements 3.1 Security The CIM module provides a secure way of cellular data transmission to the cloud and uses certificates for access authorisation. 3.2 RF safety Installers and end users must be provided with these installation and operating instructions and operating conditions for satisfying RF exposure compliance.
  • Page 10: Emc Statements For Usa

    Changes or modifications made to this equipment not expressly approved by Grundfos may void the FCC authorization to operate this equipment. 3.5 EMC statements for USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 11: Mechanical Installation

    Red LED for future use. • Red and green status LED for internal communication between LED2 the CIM module and the Grundfos product. • Blue LED for future use. DIP switch for resetting CIM 280. • To reset CIM 280, press and hold for 0.5 - 1...
  • Page 12: Fitting A Cellular Antenna

    PDU SMS roaming Related information activated. 6.4 LED1 is flashing yellow For Grundfos/Telenor SIM cards delivered with the product, go to step 3 as these come preconfigured for use with the cellular module. 1. Make sure that the SIM card is activated with local data usage and international PDU SMS as part of the subscription.
  • Page 13: Connectingthe Rs-485 Communication Interface

    4.4 Connecting the RS-485 communication 4.5 Connecting the battery interface WARNING Connect the wires according to the below table. Flammable material Death or serious personal injury SW2 line termination needs to be switched ‐ Do not use the battery in temperatures on if the unit is the last device on a subnet.
  • Page 14: Electrical Connection

    1. Switch on the power supply. The CIM module is Make sure that the power supply powered either by the Grundfos product in which it cannot be switched on accidentally. is fitted or by the battery in case of a power cut.
  • Page 15: Fault Finding

    Various faults of the CIM module can be detected by observing the status of the three communication LEDs. 6.1 Both LEDs remain off when the power supply is connected Cause Remedy The CIM module is fitted incorrectly in the Grundfos • Make sure that the CIM module is fitted correctly in product.
  • Page 16: Led1 Is Flashing Yellow

    6.4 LED1 is flashing yellow LED1 is flashing with a one-second interval. Cause Remedy The SIM card is not inserted. • Insert the SIM card. The SIM card is not inserted correctly. • Insert the SIM card correctly. The PIN code of the SIM card is not removed or set •...
  • Page 17: Technical Data

    1. Use the public or private waste collection service. category B1 (2100 MHz, 23 dBi), 2. If this is not possible, contact the nearest Grundfos company or service workshop. B3 (1800 MHz, 23 dBi), Operation-frequency B7 (2600 MHz, 23dBi), variant I (EU)
  • Page 18 Argentina China Greece Bombas GRUNDFOS de Argentina S.A. GRUNDFOS Pumps (Shanghai) Co. Ltd. GRUNDFOS Hellas A.E.B.E. Ruta Panamericana km. 37.500industin 10F The Hub, No. 33 Suhong Road 20th km. Athinon-Markopoulou Av. 1619 - Garín Pcia. de B.A. Minhang District P.O. Box 71 Tel.: +54-3327 414 444...
  • Page 19 Fax: +66-2-725 8998 Fax: + 370 52 395 431 Москва, RU-109544, Russia Turkey Тел. (+7) 495 564-88-00 (495) 737-30-00 Malaysia GRUNDFOS POMPA San. ve Tic. Ltd. Факс (+7) 495 564 8811 GRUNDFOS Pumps Sdn. Bhd. Sti. E-mail grundfos.moscow@grundfos.com 7 Jalan Peguam U1/25 Gebze Organize Sanayi Bölgesi...
  • Page 20 92500064 09.2022 ECM: 1347327 www.grundfos.com...

This manual is also suitable for:

Cim 280-us gic gen2

Table of Contents