Printing A Self-Test; Configuring The Printer; Using Printer Data Cables - Oneil MF4T User Manual

MICROFLASH 4T PRINTER USER'S GUIDE

Printing a Self-Test

1. After installing the paper, open the printer's cover.
Caution: If the red, battery isolator labels are
installed, remove them.
2. Press and hold the red, self-test button for
approximately five seconds until printing begins.
3. After printing begins, release the red, self- test
button.

Configuring the Printer

The printer has many configurable settings. To
configure or upgrade firmware, download the Windows
configuration program at www.oneilprinters.com.

Using Printer Data Cables

1. Select the appropriate cable for use with the host
and/or device you are using.
2. Insert the plug into the printer's data port
(Figure 10).
Figure 10
3. Lead the cable through the notch on the outside of
the printer's cover.
4. With the cable exiting the front of the printer, close
and latch the printer's cover.
7