Using Batteries: General Guidelines; Installing And/Or Replacing Batteries - Oneil MF4T User Manual

MICROFLASH 4T PRINTER USER'S GUIDE

Using Batteries: General Guidelines

If your printer came with batteries already installed,
remove the red, battery isolator labels. If your
printer did not come with batteries installed, see
Installing and/or Replacing Batteries on this page
If you are storing your printer for a long period of
time, reinstall the battery isolator labels.
Both batteries must be installed for your printer to
operate properly.

Installing and/or Replacing Batteries

1. Open the printer's cover (Figure 1).
2. If applicable, remove the batteries by pressing the
retainer clip outward with your thumb (Figure 2).
Figure 1
3. While pressing the retainer clip, lift the outside end
of the battery past the retainer clip.
4. Insert or replace the new batteries. Verify the
battery contacts are facing down and are on the
outside edge of the printer (Figure 3).
Figure 3
Figure 2
2
.