Printing A Self-Test - Oneil MICROFLASH 2TE User Manual

MICROFLASH 2Te PRINTER USER'S GUIDE
4. Feed the end of the paper under the roller. The
paper automatically feeds under the roller and exits
from the top of the print head. Verify the paper exits
straight.
Figure 5
5. Lower the green, print head release lever (Figure 6).
6. Feed the paper through the printer's cover
(Figure 7).
Figure 6
7. Close and latch the printer's cover.
8. Tear off any excess media.

Printing a Self-Test

1. After installing the paper, open the printer's cover.
2. Press and hold the green, self-test button for
approximately five seconds until printing begins.
3. After printing begins, release the green, self-test
button.
Figure 7
4