MICROFLASH 4T PRINTER USER'S GUIDE
Using External Charging
Note:
he following information applies to printers
T
installed with external charge capabilities.
Figure 12
Overview
External charge-capable printers have two charging
contact points located on the back of the printer's case
(Figure 12). External charge-capable printers can be
used with various O'Neil accessories such as the swivel
lock bracket and the external swivel lock depot charger.
When an external charge-capable printer is mounted to
one of these accessories, the printer's batteries are
automatically charged. For more information, see the
instruction sheet(s) included with the accessories.
Warning: Use of any product not approved by O'Neil
Product Development, Inc. for use with their printers
could cause damage to the batteries and/or printer
and will void the warranty.
Failure to observe the instructions and/or warnings
specified in the documentation may result in damage
to your printer. O'Neil Product Development, Inc. does
not accept liability for resulting damages or injuries.
(2) Charging contact points
13