MICROFLASH 4T PRINTER USER'S GUIDE
Using a CardReader
Note:
he following information applies to printers
T
installed with the CardReader option.
Figure 11
General Guidelines
To wake up the CardReader, insert a card into the
CardReader slot. One short beep indicates the
CardReader/printer is awake.
If you are using a Smart CardReader, insert a card
with the gold contacts facing away from the printer
and leave the card in CardReader slot.
If you are using a Magnetic CardReader, insert a
card with the stripe facing toward the printer, then
slowly remove the card from the CardReader slot.
For information on CardReader LED indicators and
audio indicators, see
Audio Indicators on page 9
CardReader
CardReader
Slot
LED
Using Buttons, LEDs, and
12
.