Moxa Technologies CN2600 Series Quick Installation Manual

CN2600 Series
Quick Installation Guide
Third Edition, December 2013
Overview
The Moxa CN2600 dual-LAN terminal servers have 8 or 16 RS-232
or RS-232/422/485 ports and dual 10/100 Mbps Ethernet LAN
ports, and some models come with dual AC power inputs. The
CN2600 terminal servers are used to connect terminals, modems,
printers, and other serial devices to LAN hosts, and all models
comply with TCP/IP and IEEE 802.3 specifications using standard
twisted pair 10/100BaseTX cable as the transmission medium.
CN2600 Series Models
Model Name Description
CN2610-8 8 RS-232 ports with RJ45 connectors,
100-240 VAC input
CN2610-8-2AC 8 RS-232 ports with RJ45 connectors,
2 100-240 VAC input
CN2610-16 16 RS-232 ports with RJ45 connectors,
100-240 VAC power input
CN2610-16-2AC 16 RS-232 ports with RJ45 connectors,
2 100-240 VAC power inputs
CN2650-8 8 RS-232/422/485 ports with RJ45
connectors, 100-240 VAC power input
CN2650-8-2AC-T Dual-LAN, dual-AC-power terminal server with
8 RS-232/422/485 ports, -40 to 75°C
operating temperature
CN2650-8-2AC 8 RS-232/422/485 ports with RJ45
connectors, 100-240 VAC power input
CN2650-16 16 RS-232/422/485 ports with RJ45
connectors, 100-240 VAC power input
CN2650-16-2AC-T Dual-LAN, dual-AC-power terminal server with
16 RS-232/422/485 ports, -40 to 75°C
operating temperature
CN2650-16-2AC 16 RS-232/422/485 ports with RJ45
connectors, 2 100-240 VAC power inputs
CN2650I-8 8 RS-232/422/485 ports with DB9-M
connectors and 2 KV isolation protection,
100-240 VAC power input
CN2650I-8-2AC 8 RS-232/422/485 ports with DB9-M
connectors and 2 kV isolation protection,
2 100-240 VAC power inputs
P/N: 1802026000021
– 1 –
CN2650I-16 16 RS-232/422/485 ports with DB9-M
connectors and 2 kV isolation protection,
100-240 VAC power inputs
CN2650I-16-2AC 16 RS-232/422/485 ports with DB9-M
connectors and 2 kV isolation protection,
2 100-240 VAC power inputs
Package Checklist
The CN2600 dual-LAN terminal server products are shipped with
the following items:
• 1 CN2600 series terminal server
• Power cord (AC models only)*
• 1 DB9 serial cable (CBL-RJ45F9-150)
• 1 DB25 serial cable (CBL-RJ45M25-150)
• Rackmount kit (includes 2 brackets and 8 screws)
• Quick installation guide (this guide)
• Documentation and software CD-ROM
* Power cords are available with US, Euro, UK, and JP plugs.
Hardware Introduction
NOTE The wide temperature models do not come with the LCM
display panel and push buttons. The LCM description below
applies only to standard temperature models.
Front Panel
LED Color Description
Reset None Press the Reset button for 5 seconds to load
factory defaults. The CN2600 will beep twice
when the configuration has been reset.
Ready Red Used for configuring the IP address and other
parameters.
Green Lights up when the CN2600 system is ready.
Serial Tx Green Flashes to indicate serial port transmission.
Serial Rx Yellow Flashes to indicate serial port reception.
– 2 –
Rear Panel
Connector Function
AC Power Automatic detection of 100-240 V, 47-63 Hz AC
Input power supply.
Power On/Off "I" indicates power on; "O" indicates power off.
Switch
RS-232 One RJ45 connector for console terminal
Console Port connection.
LAN1 Auto detecting 10/100 Mbps port.
LAN2 Auto detecting 10/100 Mbps port.
Serial Ports 8 or 16 RJ45 or DB9 connectors for DCE (modem)
connections.
LCM Display
If the CN2600 is working properly, the LCM panel will display a
green color. The red Ready LED will also light up, indicating that
the CN2600 is receiving power. After the red Ready LED turns to
green, you will see a display similar to the following: (Example)
C N 2 6 1 0 - 1 6 _ 3
1 9 2 . 1 6 8 . 1 2 7
CN2610-16: The CN2610's name
03: The CN2610's serial number
192.168.127.254: The CN2610's IP address
– 3 –
. 2 5 4