Table of Contents
Advertisement
3.5 Picture Adjustment
1. Select SCREEN ADJUSTMENT from the SYSTEM menu and press the [MENU] key.
2. Use the [ ]/[ ] key to select item to adjust.
HOR. SIZE:
HOR. POSITION:
VER. SIZE:
VER. POSITION:
DEFLECTION DIST: Corrects concave distortion.
BRIGHTNESS:
BRIGHTNESS STEP: Sets the amount of brightness levels available when changing
CONTRAST MAX:
CONTRAST MIN:
FACTORY SETTING: Restores the factory settings of this menu. (All zeroes except
3. Use the [t]/[s] key (or[+]/[-]) key to enter appropriate value.
4. Press the [MENU] key to close the menu and return to the SYSTEM menu.
Note: Vertical and horizontal are reversed as shown right.
[SCREEN ADJUSTMENT]
HOR. SIZE
:
+0
HOR. POSITION
:
+0
VERT. SIZE
:
+0
VERT. POSITION
:
+0
DEFLECTION DIST. :
+0
BRIGHTNESS
:
+0
BRIGHTNESS STEP :
1
CONTRAST MAX
:
255
CONTRAST MIN
:
255
FACTORY SETTING : YES
(Select 'YES' & press [MENU] to default setting.)
[ ] [ ] : Select item.
[t] [s] : Change setting. (or [-], [+])
[MENU] : Return to SYSTEM MENU.
Figure 3-8 Screen adjustment menu
Adjusts picture size in hori-
zontal direction.
Adjusts picture position in
horizontal direction.
Adjusts picture size in verti-
cal direction.
Adjusts picture position in
vertical direction.
Adjusts picture brightness.
picture brightness.
Sets contrast setting to use with maximum brightness setting
(8). (Setting cannot be lower than CONTRAST MIN setting.)
Sets contrast setting to use with minimum picture brightness
is used. (Setting cannot be higher than CONTRAST MAX
setting.)
CONTRAST which is 255.)
(1-18)
(CONTRAST MIN +1 - 255)
(0 - CONTRAST MAX -1)
NO <Valid for this page>
Vertical
20
Horizontal
Advertisement
Table of Contents
