Using Ximage For Customized Waypoint Symbols; Connecting The Gxm 40 Antenna (Gpsmap 696) - Garmin GPSMAP 696 Owner's Manual

Appendix D

USING XIMAGE FOR CUSTOMIZED WAYPOINT SYMBOLS

xImage allows you to exchange images between your PC and your GPSMAP 695/696.
You can download and save screen shots of any screen shown on your unit. xImage
also allows you to download customized splash screens and waypoint symbols from
compatible GPS units, customize them (if you have an image editing program on your
PC), and send them back to your GPS unit.
You can download xImage from the Garmin Web site at www.garmin.com/ximage.
Refer to the help file for complete instructions about using xImage.

CONNECTING THE GXM 40 ANTENNA (GPSMAP 696)

Connect the GXM 40 antenna to the GPSMAP 696 to access SiriusXM Satellite
Weather and SiriusXM Radio. For more information about the GXM 40 antenna, see
the GXM 40 Owner's Manual.
You must subscribe to SiriusXM Radio and/or SiriusXM WX
NOTE:
Satellite Weather to use the SiriusXM Radio and/or SiriusXM Weather
features on your GPSMAP 696.
Connecting the GXM 40 antenna:
1) Position the antenna where it has a clear view of the sky. This can be on
the outside of the vehicle or behind the windscreen.
2) Plug the GXM 40 cable into the USB port on the left side of the unit, as
shown in the following illustrations.
176
GXM 40 Antenna
Garmin GPSMAP 695/696 Owner's Manual 190-00919-00 Rev. E