Garmin GPSMAP 696 Owner's Manual page 195

Setting NMEA output mode:
1) Press the MENU Key twice to select the Main Menu.
2) Turn or move the FMS Joystick to select 'System Setup', and press the ENT
Key.
3) Turn or move the FMS Joystick to select 'Interface', and press the ENT Key.
4) With the 'Serial Data Format' field highlighted, turn the FMS Joystick to
select 'NMEA In/Out'.
5) Move the FMS Joystick to highlight the 'NMEA Output Mode' field.
6) Turn the FMS Joystick to select 'Normal' or 'Fast'.
NMEA Sentence Output:
• Normal Mode: GPRMB, GPRMC, GPGGA, GPGSA, GPGSV, GPGLL, GPBWC,
GPVTG, GPXTE, GPBOD, GPRTE, GPWPL, GPAPB, PGRME, PGRMZ, PGRMM,
and PGRMH.
• Fast Mode: GPRMB, GPRMC, PGRMZ, and PGRMH.
tis i
nterFAce
Configuring TIS input:
1) Press the MENU Key twice to select the Main Menu.
2) Turn or move the FMS Joystick to select 'System Setup', and press the ENT
Key.
3) Turn or move the FMS Joystick to select 'Interface', and press the ENT Key.
4) With the 'Serial Data Format' field highlighted, turn the FMS Joystick to
select 'TIS In'
The TIS Status field indicates one of the following messages:
• Waiting For Data—searching for a valid TIS data stream.
• Data Available—receiving TIS data from the transponder.
• Data Unavailable—connection to transponder established, but TIS service is
unavailable.
• Lost Connection—an error occurred or the connection to the transponder was
lost.
190-00919-00 Rev. E
s
etUp
or TIS In/NMEA & VHF Out
Garmin GPSMAP 695/696 Owner's Manual
.
Appendix D
179