Table of Contents
Advertisement
5. Lifting guide
These instructions must be followed to prevent injury to operatives or damage to the product.
•
Create a lifting plan, noting the following specifics, to prevent injury to operatives or damage to the product during the
lifting process.
•
Refer to the individual pallet / product's weight sticker and make sure the lifting equipment is suitable for this weight.
•
Inspect all the chamber's lifting eyes.
•
Do not use chains. The product must be lifted using a 4‑hook lifting spreader beam with the correct length and breadth
for the widths of the chamber's lifting eyes.
•
Under no circumstances should the lifting equipment impinge on the clear opening flange. This will apply pressure to the
flange and will damage the chamber.
•
Adhere to all current legislative and training requirements.
If you require further advice contact Delta Membranes on 01992 523 523 between 8am and 5pm, Monday to Friday or by
email at info@deltamembranes.com before attempting to lift the product.
LIFTING
EYES
LIFTING
EYES
LIFTING
EYES
4-HOOK LIFTING SPREADER BAR SUITABLE
FOR THE WIDTHS OF THE LIFTING EYES
LIFTING
EYES
DO NOT USE CHAINS
01992 523 523 info@deltamembranes.com www.deltamembranes.com
USE A SPREADER BAR
12
Advertisement
Table of Contents
