Advertisement
Quick Links
Advertisement
Related Manuals for Teka FQ6TG
Summary of Contents for Teka FQ6TG
- Page 1 P20208R08 P 2 0 2 0 8 R 0 7...
- Page 5 Notes: Use of a gas cooking appliance produces heat and moisture in the room in which it is installed. The room must therefore be well ventilated by keeping the natural air vents clear (fig. 3) and by activating the mechanical aeration device (suction hood or electric fan fig.
- Page 6 2) HOW TO USE THE ELECTRIC PLATES Mixed hot pl ates may be eq uipped with a nor mal or rapid electric plates. There are controlled by switches with various positions (see fig. 6) and is switched on by turning the knob to the required setting.
- Page 8 CLEANING IMPORTANT: Always disconnect the appliance from the gas and electricity mains before carrying out any cleaning operation. 3) HOT PLATE Periodically wash the hot pl ate, the enamel led stell pan suppor t, the enamel led burner caps “C” and the burner heads “M” (see fig. 8) with lukewarm soapy water. Following this, all parts should be thoroughly rinsed and dried.
-
Page 10: Installation
INSTALLATION IMPORTANT INSTALLATION SPECIFICATIONS The installer should note that the appliance that side walls should be no higher than the hot plate itself. Furthermore, the rear wall, the surfaces surrounding and adjacent to the appliance must be able to withstand an overtemperature of 65 K. The adhesive used to stick the plastic laminate to the cabinet must be able to withstand a temperature of not less than 150°... -
Page 11: Gas Connection
INSTALLATION 8) GAS CONNECTION Before connecting the appliance, check that the values on the data label affixed to the underside of the hot plate correspond to those of the gas and electricity mains in the home. A label on the appliance indicates the regulating conditions: type of gas and working pressure. - Page 13 a / b a / b...
- Page 15 SERVICING Always disconnect the appliance from the electricity and gas mains before proceeding with any servicing operation. 12) REPLACING HOT PLATE PARTS When parts housed within the hot plate need replacing, it is first necessary to remove the hot plate itself from the cabinet, to overturn it, unscrew screws “V” and to remove part “T” (see fig.
-
Page 17: Technical Assistance And Spare Parts
TECHNICAL DATA FOR THE APPLIANCE GAS REGULATION TECHNICAL ASSISTANCE AND SPARE PARTS Before leaving the f actory, this appliance w ill have been tested and regulated by expert and specialized personnel in order to guarantee the best performances. Any repairs or adjustments which may be subsequently required may only be carried out by qualified personnel with the utmost care and attention.
Need help?
Do you have a question about the FQ6TG and is the answer not in the manual?
Questions and answers