Siemens SIMATIC ET 200SP Manual page 49

AQ 4xU/I ST analog output module
Note
For operation of the AQ 4xU/I ST analog output module, firmware version V1.0 (6ES7135-
6HD00-0BA1) with the IM 155-6 PN HF interface module (6ES7155-6AU00-0CN0), you
need to set the "Reaction to CPU STOP" parameter to "Turn off" with a PROFINET send
clock < 1 ms.
First BaseUnit of an ET 200SP in the configuration (as of V3.0)
Note
First BaseUnit of an ET 200SP in the configuration
The first BaseUnit of an ET 200SP station may be a dark-colored one if an AC I/O module or
AI Energy Meter ST is plugged. Please note the information on limiting the overvoltage and
power rating in the AC I/O module manuals.
A light-colored BaseUnit must be plugged into the slot of the first 24 V DC I/O module in
order to route the 24 V DC supply voltage via a fuse.
Note the type of the BaseUnits during the configuration.
As of firmware V3.x, the interface modules support inserting dark-colored BaseUnits in slot
1. This means that modules which do not have a connection to the integrated voltage buses
P1 and P2 can now also be configured from slot 1. The following modules are currently
included:
● AI EnergyMeter ST (6ES7134-6PA00-0BD0)
● DI 4x120..230VAC ST (6ES7131-6FD00-0BB1)
● DQ 4x24..230VAC/2A ST (6ES7132-6FD00-0BB1)
Requirement for configuration of these modules in slot 1:
● Configuration via GSD or GSDML
● Configuration as of STEP7 V5.5 SP4 with
– HSP0241 V2.0 for IM155-6 PN ST
– HSP0242 V2.0 for IM155-6 DP HF
– HSP0255 V3.0 for IM155-6 PN HF
● Configuration as of STEP7 V13 SP1
Reaction times for fail-safe modules
The following maximum reaction time of the interface module must be taken into account
when calculating the reaction times of fail-safe modules: Maximum reaction time =
configured update time + 400 μs (but at least 1.4 ms)
IM 155-6 PN HF interface module (6ES7155-6AU00-0CN0)
Manual, 03/2015, A5E03915895-AF
Compatibility
6.1 Compatibility of modules
49