Pointers For More Information; A Special Thanks - Compaq DIGITAL Server Cluster Kits for Windows NT Configuration Manual

63
& Refer to your Microsoft Cluster Server Administrator' s Guide for specific procedures.
Step 16b Install DIGITAL Clusters for Windows NT
§ Use the Cluster Checkout Utility on the Quick Launch CD to verify the connections in your cluster.
§ Turn off the power for the RAID Array, and boot both servers.
§ On Host A, install DIGITAL Clusters for Windows NT. Leave Host A up and running. Do not reboot
the server at this time.
§ On Host B, install DIGITAL Clusters for Windows NT.
§ Turn on power for the RAID Array.
§ Reboot the servers one at a time.
§ Run the DIGITAL Cluster Administrator on both servers to verify the cluster installation.
§ Use the DIGITAL Cluster Administrator to set up your shared disks in failover groups.
§ Install DIGITAL Clusters for Windows NT client software on each client as needed.
& Refer to your DIGITAL Clusters for Windows NT Installation and Configuration Guide. For
information on the Cluster Administrator, see your DIGITAL Clusters for Windows NT Administrator' s
Guide for specific procedures.

Pointers for More Information

For the latest information on DIGITAL Server Cluster Kits, go to:
http://akin40.mro.dec.com/DSClusterKits.htm
For the latest information on DCNT, go to:
http://www.windows.digital.com/clusters
For the official Microsoft Hardware Compatibility List , go to:
http://www.microsoft.com/hwtest
For the latest information on the status of our Microsoft Cluster Server qualification and certification
efforts, go to:
http://akin40.mro.dec.com/clusters/DSClusterKits.htm

A Special Thanks

Thanks to all who contributed to this guide. A special thanks goes to Barbara Landino for her cluster-
specific information on ServerWORKS Manager.
-
DIGITAL Server Cluster Kits for Windows NT Configuration Guide