Compaq DIGITAL Server Cluster Kits for Windows NT Configuration Manual page 24

24
Figure 1-5 Add New Component Status Alarm Category Tab
5. From the Alarm Category drop-down list, choose the Cluster Group Status.
6. On the Items to be Monitored list, select the cluster resources on which you are setting the alarms.
You can choose from:
All Cluster Groups (all resources that were defined when you created the cluster)
Any or all of the remaining resource groups. Different clusters will have different selections.
Figure 1-6 Add New Component Status Alarm Dialog Box
7. Click the States tab and set an alarm on the selected resources.
To show failover from Server A to the Server B, select Not Current Controller.
Click the Right arrow to add the state to the Alarms states list.
DIGITAL Server Cluster Kits for Windows NT Configuration Guide