Compaq DIGITAL Server Cluster Kits for Windows NT Configuration Manual page 62

62
Step 10 Install RAID Drivers on Host A
Install the HSZDISK.SYS class driver for the RAID Array. & Refer to your StorageWorks RAID Arrays
for Windows NT Clusters Installation Guide for specific procedures.
Step 11 Install Console Software on Host A
Install StorageWorks Command Console to create logical units (LUNs). & Refer to your StorageWorks
RAID Arrays for Windows NT Clusters Installation Guide for specific procedures.
Step 12 Partition Drives on Host A
§ Use Microsoft' s Disk Administrator to format and partition your disk drives in the RAID Array.
§ Assign high order drive letters (K and up) to the shared drives. Assign Y to the CD-ROM drive.
§ Shut down Host A.
Step 13 Install RAID Drivers on Host B
§ Install the HSZDISK.SYS class driver for the RAID Array.
§ Reboot Host A.
& Refer to your StorageWorks RAID Arrays for Windows NT Clusters Installation Guide for specific
procedures.
Step 14 Review RAID Array
§ Reboot Host B and use Microsoft' s Disk Administrator to verify that Host B can recognize the RAID
Array.
§ Assign high order drive letters (K and up) to the shared drives. All shared drives included in the
cluster must have identical drive assignments. Assign Y to the CD-ROM drive.
Step 15 Review Network Addresses
§ Verify that clients are on the same subnet network mask as servers; node and cluster aliases should be
the same.
§ Shut down Host B.
& Refer to your Microsoft Cluster Server Administrator' s Guide for specific procedures.
Step 16 Choose Windows NT Cluster Software
Install Microsoft Cluster Server (go to 16a) or DIGITAL Clusters for Windows NT (go to 16b).
Step 16a Install Microsoft Cluster Server
§ Boot Host A.
§ From the Microsoft Windows NT Server, Enterprise Edition Installer dialog box, select the Microsoft
Cluster Server check box and start the installation.
§ Install Microsoft Cluster Server on Host A.
§ Boot Host B and install Microsoft Cluster Server on Host B.
DIGITAL Server Cluster Kits for Windows NT Configuration Guide