Table of Contents
Advertisement
42
Ready-to-Go Cluster Components
Although there are several Ready-to-Go Cluster configurations available, the following example lists the
components of the Ready-to-Go Cluster using the 7305.
The DIGITAL Server 7305HA is a H9A10 white cabinet 1.70m high (34U) dual AC-In Power
Distribution Unit containing:
Two 7305R DIGITAL Servers each with:
One 64-bit Alpha EV5.6 533Mhz with 4MB cache
Integrated S3 Trio SVGA graphic controller with 1MB VRAM
One CDROM drive
One 1.44MB Diskette drive
One 4.3GB UltraWide SCSI disk
One 100Mb/s Ethernet Adapter for Cluster communication
One 100Mb/s Ethernet Adapter for LAN Network Connection
One two-channel UltraWide SCSI Single Ended adapter
One one-channel UltraWide SCSI Differential adapter
One 128MB ECC EDO RAM option (4 x 32MB DIMM)
Two 450W power supply
One RA7000 RAID Array with:
One HSZ70 controller with 64MB cache and 24 SBB Slots
Two AC-In modules
One Environment Module
Eight 180W power supplies
One 4.3GB UltraWide SCSI disk
Components NOT included in the Ready-to-Go Clusters
The following components are not included in the Ready-to-Go Clusters:
Tape drives
Tapes drives must be ordered separately.
Servers disk drives
Servers contain only one 4GB drive. Additional drives must be ordered separately.
RAID Subsystem disk drives
RAID Subsystem contains only one 4.3GB drive. Additional drives must be ordered separately.
Note:
The drives for servers and RAID subsystems are different.
You can also order Ready-to-Go Clusters with the following options:
Console Switch
Additional Shelves
Additional Raid Shelves
DIGITAL Server Cluster Kits for Windows NT Configuration Guide
Advertisement
Table of Contents
