Auto Lap - Garmin Forerunner 610 Owner's Manual

Your Training
message. The run/walk alerts will
repeat until you stop the timer.

Auto Lap

The default Auto Lap setting is By
Distance, 1 mile or 1 kilometer.
NOTE: Auto Lap does not function
during interval or custom workouts.
Marking Laps by Distance
You can use Auto Lap to automatically
mark the lap at a specific distance. This
feature is helpful for comparing your
performance over different parts of a
run.
> Training > Options >
1. Select
Auto Lap.
2. Select Auto Lap > By Distance.
3. Select Lap At, and enter a distance.
10
Marking Laps by Position
You can use Auto Lap to automatically
mark the lap at a specific position. This
feature is helpful for comparing your
performance over different parts of a
run (for example, a long hill or training
sprints).
1. Select > Training > Options >
Auto Lap.
2. Select Auto Lap > By Position >
Lap At.
3. Select an option:
• Select Lap Press Only to
trigger the lap counter each time
you select LAP and each time
you pass any of those positions
again.
• Select Start and Lap to
trigger the lap counter at the
GPS location where you select
START and at any location
during the run where you select
LAP.
Forerunner 610 Owner's Manual