System Setup - Garmin StreetPilot GPS Owner's Manual

12 parallel channel gps receiver

Hide thumbs Also See for StreetPilot GPS:

Table of Contents

To restore the factory settings:

1. Use the ROCKER keypad to move the cursor to the file tab for which you want to restore the

factory settings.

2. Press the OPTION key. A window is displayed with Restore Factory Settings highlighted

(top right picture).

3. Press the ENTER key. Only the settings for that file tab are modified.

4. If desired, repeat steps 1 through 3 for other file tabs.

The file tab headings and System Setup functions are:

General - Simulator, Night Mode, Battery Type, Beeper, and Distance Units.

Alarm - Approaching Waypoint Alarm, Speed Alarm.

Time - Formats for 12 or 24-hour Time, Time Zone, Display of Current Time and Date, Sunrise and

Sunset Times.

Comm Port - Serial Data Communication Format.

The following pages describe, in more detail, the available setting for each System Setup file tab item.

Reference

System Setup

Restoring Factory Settings

Table of Contents