Using The Simulator - Garmin StreetPilot GPS Owner's Manual

12 parallel channel gps receiver

Hide thumbs Also See for StreetPilot GPS:

Table of Contents

Quick-Start

Using the Simulator

Simulator "On" Selection

You can start the Simulator Mode if you are indoors where the StreetPilot is unable to receive

signals from GPS satellites. It is useful to do this when planning a trip or finding cities, and (if using

MetroGuide Map Data) addresses, intersections, or businesses.

To start the Simulator Mode:

1. Press the OPTION key twice. The StreetPilot displays the System Setup menu. The 'General' file

tab should be displayed, and the cursor should be on the 'Simulator' field. If not, use the

ROCKER keypad to select the 'Simulator' field (see left picture).

2. Press the ENTER key and use the ROCKER keypad to select On (see left picture).

3. Press the ENTER key again to start the Simulator Mode.

4. Press the PAGE key or QUIT key to return to the page the StreetPilot was previously displaying.

Table of Contents