Settings; System Setup - Garmin Astro DC 40 Owner's Manual

Settings

Settings
The Settings menu (MENU > MENU
> Advanced > Settings) customizes
the operation of your Astro.

System Setup

To open the System page:
Press MENU > MENU >
Advanced > Settings > System.
GPS–sets the unit to operate in
•
Normal mode, Battery Saver
mode, GPS Off, or Demo
Mode.
WAAS/EGNOS–enables or
•
disables WAAS (Wide Area
Augmentation System) in the
U.S., or EGNOS (European
Geostationary Navigation
Overlay Service).
Battery Type–selects the
•
battery type (alkaline, NiMH, or
lithium).
0
• External Power Lost–selects
whether the Astro stays on or
turns off when external power is
removed.
• Proximity Alarms–turns all
proximity alarms on or off.
To restore system defaults and
view system information:
On the System page, press MENU.
• Restore Defaults–restores
system settings to the default
settings.
• View Card Info–displays the
microSD card status.
Mass Storage Mode–allows
•
you to use the microSD card as
a data-storage device
• Software Version–displays
the Astro software version, the
GPS SW version, and the unit
identification number.
NOTE: View Card Info and Mass
Astro and DC 40 Owner's Manual