Garmin StreetPilot GPS Owner's Manual page 39

Stopped Time - The length of time that the vehicle has been stopped (stationary) during the time the
StreetPilot has been tracking your location, since the Trip Computer was last reset.
Total Time - The total length of time that the StreetPilot has been tracking your location, since the Trip
Computer was last reset. This is always equal to Driving Time plus Stopped Time.
Additional Information:
When the StreetPilot is in the Simulator mode, the simulated motion may be controlled from the
Trip Computer View:
Pressing the UP area of the ROCKER keypad increases the speed by 10 miles per
hour (mh)
Pressing the DOWN area of the ROCKER keypad decreases the speed by 10 mh.
Pressing the LEFT area of the ROCKER keypad causes a turn to the left.
Pressing the RIGHT area of the ROCKER keypad causes a turn to the right.
To reset the Trip Computer or the Maximum Speed:
1. While the StreetPilot is displaying the Trip Computer View of the Dashboard Page, press the
OPTION key to display the Options window (lower right picture).
2. Use the UP and DOWN keys to highlight Reset Trip Computer.
3. Press the ENTER key.
4. To reset the Maximum Speed only, highlight Reset Max Speed and then press the ENTER key.
Reference
The Trip Computer
Resetting the Max Speed
29