Epson Equity 386/33 PLUS User Manual page 32

Many hard disk drives, including all Epson drives,
automatically park their heads when you turn off the
computer. If your hard disk drive does not do this, or if you are
not sure that it does, be sure to run HDSIT.
Follow these steps to run HDSIT:
1. If you copied the HDSIT.COM and HDSIT.VER files to your
hard disk, log onto the directory where they are stored. If
you did not copy the files to the hard disk, insert the
Reference diskette in drive A. Then type
Type
HDSIT
2.
You see a message on the screen that telIs you the disk drive's
read/write heads will remain locked until you reset the
computer or turn the power off and on again. The computer
locks the heads and disables the keyboard. Remove any
diskettes and turn off the computer. You are now ready to
move it to the new location.
1-22 Using Your Computer
and press [Ent#I
: and press
A