Replacing The Bracket In The Computer - Epson ActionTower 8000 User Manual
Hide thumbs
Also See for ActionTower 8000:
- Product information manual (11 pages) ,
- Product support bulletin (1 page)
Table of Contents
Advertisement
3.
Secure the drive with the screws that came with it; you can
use two or four screws, depending on the location of the
holes in your drive.
Replacing the Bracket in the Computer
Follow these steps to replace the bracket in your computer:
1.
Lower the bracket into the mounting area and slide it
forward, inserting the front of the diskette drive through
the drive slot in the front panel of the computer.
2.
Make sure the holes in the bracket are aligned with the holes
in the drive bay and brace. Then secure the bracket with the
screws you removed previously.
Installing and Removing Drives in the Slimline Computer
5-7
Advertisement
Table of Contents
