Running Setup; Starting The Setup Program - Epson ActionTower 8000 User Manual

Running SETUP

You may want to run the SETUP program the first time you use
your computer to customize the settings. You also may need to
run SETUP again later if you add options or change your
configuration.

Starting the SETUP Program

When you start your computer, it performs some power-on
diagnostics. During these diagnostics, you may see the
following message:
Press
Press Del. This message is only on the screen for a few seconds.
If you missed it, restart your computer and try again.
If, during power-on diagnostics, the system detects an error in
your system configuration, you hear two beeps and see an
error message followed by this message:
Press <Fl> to resume, <DEL> to run SETUP
Press Del to run SETUP and correct the problem
SETUP displays the Main Menu, which allows you to select
various options to identify your system's configuration and
then save your new values. You can also cancel any changes
you have made and restore the default values stored in ROM
or load the previously stored values.
2-2 Running SETUP and lnstalling Drivers
<DEL> to enter S E T U P