Removing The Cover - Epson ActionTower 8000 User Manual
Hide thumbs
Also See for ActionTower 8000:
- Product information manual (11 pages) ,
- Product support bulletin (1 page)
Table of Contents
Advertisement
Caution
Never install options or change jumper settings when the
computer is turned on or the power cable is connected to the
computer.
Removing the Cover
You need to remove the computer's cover to install any of the
options described here or to install or remove a disk drive (as
described in Chapters 5 and 6). Follow these steps:
1.
Turn off the computer and then any peripheral devices.
2.
Disconnect the computer's power cable from the electrical
outlet and from the back panel. Also disconnect any other
cables that are connected to the computer.
3.
If the monitor is on top of the computer, lift it off and set it to
one side.
4.
Turn the computer around so the back panel is facing you.
4-2
Installing and Removing Options
Advertisement
Table of Contents
