Inserting Simms - Epson ActionTower 7500 User Manual
Hide thumbs
Also See for ActionTower 7500:
- Product information manual (11 pages) ,
- Product support bulletin (1 page) ,
- Product support bulletin (1 page)
Table of Contents
Advertisement
Inserting SIMMs
Make sure the computer is turned off and the cover is off. Then
follow these steps to install SIMMs:
1.
Refer to the illustration under "Locating the Internal
Components" to locate the SIMM sockets in the corner of
the main system board.
2.
Remove any option cards that may be blocking your access
to the SIMM sockets. (See "Removing an Option Card" for
instructions.)
3.
Position the SIMM at an angle over the empty socket, with
the SIMM components facing the front of the computer.
Installing and Removing Options
4-17
Advertisement
Table of Contents
