Epson ActionTower 7500 User Manual page 38

Integrated
The
the table below.
Integrated peripherals options
Option
COM Port 1
COM Port 2
LPT Port
LPT Mode
Floppy
Controller
* Default setting
2-8 Running SETUP and lnstalling Drivers
Peripherals
Settings
3F8, IRQ4 * (COM1)
2F8, IRQ3 * (COM2)
338, IRQ4
238, IRQ3
3E8, IRQ4
2E8, IRQ3
2E8, IRQ4
2E0, IRQ3
220, IRQ4
228, IRQ3
Auto
Disabled
378, IRQ7 *
278, IRQ7
Auto
Disabled
Standard
Bi-Directional *
ECP
Enabled *
Disabled
options are described in
Description
Assign the address for the built-in
primary and secondary serial
ports: the Auto setting detects any
optional ports you may have
installed and sets the built-in ports
automatically based on the
optional port settings to avoid
conflicts (if no optional ports are
installed, Auto sets the built-in
ports to their default settings): the
Disabled setting disables the port
Assigns the address for the built-in
parallel port: the Auto setting
detects any optional ports you
may have installed and sets the
built-in port automatically based
on the optional port settings to
avoid conflicts (if no optional ports
are installed, Auto sets the built-in
port to the default setting): select
Disabled to disable the port
Selects unidirectional AT mode
Selects PS/2 bidirectional mode
Selects Extended Capabilities Port
bidirectional mode
Enables or disables the built-in
diskette drive controller