Epson ActionTower 7500 User Manual page 91

Note that your video memory sockets may not look exactly like
the ones in the illustration. If you're not sure how to install
video memory chips, contact the EPSON Connection or your
Authorized EPSON Servicer and ask for assistance.
Follow these steps to install video memory chips:
1. Locate the video memory chip sockets on the left side of the
main system board, shown under "Locating the Internal
Components."
2. If there is an option card in your way, remove it. See
"Removing an Option Card" for instructions.
caution
To avoid generating static electricity and damaging the
memory chips, ground yourself by touching the metal
surface on the inside of the computer's back panel. Then
remain as stationary as possible while you install them.
3. Position
chip's comer with the notch in the corner of the socket, as
shown below.
4-28 Installing and Removing Options
chip
the over the socket
and
align the notch
notch
in the