Onboard Connectors; Lvds Connector - VIA Technologies EPIA-P910 User Manual

2.2. Onboard Connectors

2.2.1. LVDS Connector

The mainboard has one 24-pin LVDS panel connector on the bottom side. The onboard LVDS panel
connector allows to connect the panel's LVDS cable to support the single-channel 18-bit/24-bit display.
Backlight controls are integrated into the LVDS panel connector pinout. The LVDS panel connector is labeled
as "LVDS1". The pinout of the connector is shown below.
Figure 9 9 9 9 : LVDS connector diagram Figure : LVDS connector diagram
Figure Figure : LVDS connector diagram : LVDS connector diagram
Pin Pin
Pin Pin
1
3
5
7
9
11
13
15
17
19
21
23
Table 8 8 8 8 : LVDS connector pinout Table Table Table : LVDS connector pinout : LVDS connector pinout : LVDS connector pinout
Note: Note:
Note: Note:
LVDS1 supports 18/24 bits EDID LCD, please ensure your LCD do support EDID. For any request of None-EDID
LCD, please contact sales for customized BIOS support.
Signal Signal Pin Pin
Signal Signal Pin Pin
LVDSD0- 2
LVDSD0+ 4
GND 6
PVDD2 8
PVDD2 10
LCD1_DATA 12
LCD1_CLK 14
GND 16
VDD_BL 18
VDD_BL 20
BLEN_1 22
BAK_ADJ 24
Signal Signal
Signal Signal
LVDSD1-
LVDSD1+
GND
LVDSD2-
LVDSD2+
GND
LVDSCLK+
LVDSCLK-
GND
LVDSD3-
LVDSD3+
GND
EPIA- - - - P910 EPIA EPIA EPIA P910 User Manual P910 P910 User Manual User Manual User Manual
11