Table of Contents
Advertisement
PING SYNCHRONIZATION
Ping synchronization allows for transducers running similar frequencies to be used simultaneously
without interference.
For this feature to work, the ping synchronization wires need to be connected between sonar modules
and/or MFDs. For example, a connection must be made between HDS Pro and S3100 or HDS Pro and
ActiveTarget 2 sonar module.
¼ Note:
Only connect the ping synchronization wire cable for sounder modules/hubs or MFDs that have
transducers connected.
⚠
WARNING:
Consult the sonar module installation manual for further information on
compatibility and specific connections.
GHOST 360
Use the Ghost 360 feature to get a 360° view of the underwater environment in relation to your boat's
position.
This feature is available when an ActiveImaging 3-in-1 nose cone is attached to your Ghost trolling
motor. It allows anglers to pinpoint key underwater elements such as fish, standing structures, and
resting structures on the bottom.
¼ Note:
Ghost 360 is not a network capable feature. It can only be viewed on the multifunction display
(MFD) that the 3-in-1 nose cone is connected to.
For further details on the Ghost 360 feature, refer to the full operator manual.
19
Hide quick links:
Advertisement
Table of Contents
