Resetting The Projector - Epson PowerLite Pro Cinema 6010 User Manual

Resetting the Projector

If the image quality isn't what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.
To restore the settings in a specific menu (such as the Image or Settings menu), open that
menu, select , and confirm as needed. The example below shows how to reset the
Reset
Image menu settings:
Open the Image
menu . . .
You can also reset the lamp usage timer or restore all the projector settings to their original
values. Follow these steps:
1. Press the button on the remote control.
Menu
2. Open the
Reset
3. Do one of the following:
■
Select
Reset Lamp Hours
You should reset the lamp timer only when you install a new projector lamp. See
page 63 for more information.
■
Select
Reset Memory
■
Select
Reset All
Signal, User Button, Language, and Lamp Hours).
menu.
to clear the lamp usage timer and reset it to zero.
to clear all memory settings.
to return all projector settings to their original defaults (except Input
and select Reset
Making Detailed Adjustments
47