Turning Off The Projector; Selecting The Image Source - Epson PowerLite Pro Cinema 6010 User Manual

The power light flashes while the projector warms up. If you don't see a picture, you may
need to change the image source as described on page 21.

Turning Off the Projector

1. Turn off any equipment connected to the projector.
2. Press the Ppower button on the projector twice or press the
remote control and wait for the power light to stop flashing.
3. Turn off the power switch on the back of the projector.
Caution: Turn off this product when not in use to prolong the life of the projector.

Selecting the Image Source

The source buttons on the projector and remote control let you switch between images from
different pieces of equipment connected to the projector (such as a Blu-ray Disc/DVD player,
cable or satellite box, or video game console).
Press the button on the remote control that corresponds to the port to which your
Source
video source is connected.
Note: There may be a brief delay when switching between sources.
button on the
Standby
Setting Up the Projector
21