Epson PowerLite Pro Cinema 6010 User Manual page 69

■
If the function key doesn't let you display simultaneously on both screens, you might
need to use the Display utility in the Windows Control Panel to make sure that both the
LCD screen and external monitor port are enabled. From the Windows Control Panel,
open the
Display
then click
Advanced
computer; you may need to click a
port is set as your primary display or enabled. See your computer manual or online help
for details.
If you're using Mac OS X:
1. Open the
System Preferences
2. Select the
VGA Display
3. Click the
Arrange
4. Check the
Mirror Displays
The picture is upside-down or reversed.
Change the
Projection
The picture isn't rectangular.
■
If the image looks like
use the vertical keystone buttons to adjust the image (see page 22).
The picture contains static or noise.
■
Make sure the
Input Signal
page 50).
■
If you're viewing still images and you notice flickering or horizontal lines, turn on the
setting (see page 38).
Progressive
■
Make sure your cables are securely connected at both ends.
■
If you're using an extension cable, you may pick up interference if the cable is not
adequately shielded. You may need to use a signal amplifier for longer cables.
■
If you're displaying the same image on your computer and projector screen, try turning
off your laptop's LCD display (see page 68).
utility. In the Display Properties dialog box, click the
. The method for adjusting the setting varies from computer to
Monitor
utility and select
or
Color LCD
or tab.
Arrangement
checkbox. (See your computer manual for details.)
setting in the Settings menu (see page 49).
or , make sure the projector is not tilted up or down, then
is set correctly for your connected video equipment (see
tab, then make sure the external Monitor
.
Displays
option, if necessary.
tab,
Settings
Problem Solving
69