Adjustments For Computer Images; Split Screen Setup - Epson PowerLite Pro Cinema 6010 User Manual

Adjustments for Computer Images

In addition to the settings described previously, you can adjust the Tracking and Sync settings
for analog RGB computer images. Normally, these settings are adjusted automatically by the
projector. If you notice that the image is blurry or contains dark vertical bands, you may need
to adjust the settings yourself.
■ Auto Setup
Signal > Auto Setup
Leave this setting on so that the projector automatically adjusts the tracking, sync, and
position of the image.
■ Tracking
Signal > Tracking
Adjust the tracking to eliminate vertical bands. It is easiest to
adjust the tracking when the image contains a lot of fine detail
(such as black text on a white background).
Note: This setting is only available with a signal input through the PC
port.
■ Sync.
Signal > Sync.
Adjust the synchronization to eliminate blurriness. For best results,
make sure the tracking is properly adjusted first.
Note: This setting is only available with a signal input through the PC
port.

Split Screen Setup

Press the button while in Split Screen mode to access this menu.
Menu
■
Screen Size
Split Screen Setup > Screen Size
Adjusts the size of the two screens. Choose
screen,
Larger Right
evenly between the two screens.
to increase the size of the right screen, or
to increase the size of the left
Larger Left
Equal
Making Detailed Adjustments
to split the display
43