Epson PowerLite Pro Cinema 6010 User Manual page 12

Keep the projector level and place it at a height so its lens is even with the top or the bottom
of the screen and is centered horizontally. If this is not possible, use the lens shift dials to
reposition the image. You can use lens shift to move the image up or down by nearly its full
height, and left or right by about one-half its width (for details, see page 22).
If you place the projector off to the side, aim it straight ahead (rather than at the center of the
screen), then use the horizontal lens shift dial to center the image on the screen.
Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the
lens shift dials to change the lens position.
12
Setting Up the Projector
Projection distance
Horizontal lens shift dial
Vertical lens shift dial
Offset A
Offset B
Offset refers to distance from
bottom of image to center of
lens using maximum lens shift.