Epson PowerLite Pro Cinema 6010 User Manual page 42

■
3D Format
Signal > 3D Setup > 3D Format
Use this setting to select the 3D format supported by your video device. In most cases, the
projector will correctly detect the 3D format when this option is set to
only select the
doesn't properly display 3D images. See your video source documentation for
information on which mode to select.
■
3D Depth
Signal > 3D Setup > 3D Depth
Adjusts the depth of the 3D images. Select the
the appearance of the 3D effect.
Note: This setting is only available when using the 2D-to-3D Conversion feature.
■
3D Brightness
Signal > 3D Setup > 3D Brightness
Adjusts the brightness of 3D images. Select the
display is too dark.
Note: This setting is not available when 3D Format is set to Auto.
■
Inverse 3D Glasses
Signal > 3D Setup > Inverse 3D Glasses
Reverses the timing for the left and right shutters on the 3D active shutter glasses. Only
enable this function if 3D images are not displaying correctly.
■
3D IR Emitter
Signal > 3D Setup > 3D IR Emitter
Select
External
Accessories" on page 9 for ordering information).
■
3D Viewing Notice
Signal > 3D Setup > 3D Viewing Notice
Enables or disables the viewing notice that is displayed when 3D mode is activated.
42
Making Detailed Adjustments
, , or
2D Side by Side
if you've connected an external 3D IR emitter (see "Optional
formats when your projector
Top and Bottom
or
Medium
or
Medium
. You should
Auto
settings to increase
Strong
settings if the 3D
High