Charging The Internal Battery - auna Patagonia DAB+ Manual

1. Press and hold the Menu Button for 2 seconds to view the main menu.
2. Press TUNING (∧/∨) and Select to choose 'Scan Setting'.
3. Select between 'Strong Stations' or 'All Stations'.
Volume adjustment: Turn the Volume (∧/∨) Button to adjust the volume.

CHARGING THE INTERNAL BATTERY

Dynamo charging
1. When you turn the hand crank, the built-in dynamo will start to
generate electricity. The Lithium battery of the unit will be charged
automatically as long as you turn the hand crank.
2. While charging, the CHARGE LED on the front panel of the unit will
light up red.
Note: While the intensity of the battery power is limited, the low battery
indicator on LCD display is flashing, the internal rechargeable Lithium
battery is low and needs to be charged. Rotate the Hand Crank again to
begin charging the internal battery.
Computer USB charging.
1. Use a standard USB type A to USB type C cable. Plug one end with USB
type A into the computer USB port. Plug the other end with USB type
C into USB-type-C jack of the unit. It will start to charge the Lithium
battery automatically when your computer is ON.
2. While charging, the CHARGE LED on front panel of the unit will light up
red. It will turn to green when the battery is fully charged.
• We recommend you charge the Lithium battery for 3 - 4 hours prior to
use. Please do not charge the battery longer than recommendation as it
will shorten the battery life.
• The radio should not be used while charging with your computer.
EN
33