auna Patagonia DAB+ Manual page 26

EN
26
On waterproof performance of this product
• The water resistant specifications of this product are equivalent to IPX4
in IEC 60529 "Degrees of protection against ingress of water (IP Code)",
which specifies the degree of protection provided against the entry of
water. The product cannot be used in water.
• Unless the unit is used correctly, water may get into the product and
cause fire, electrocution, or malfunctions. Note the following cautions
carefully and use correctly.
IPX4: Protected against water splashing from any direction.
Liquids that the water resistant performance specifications apply to
Applicable
Not applicable
The water resistant performance is based on measurements performed
under the conditions described above. Note that malfunctions resulting
from water immersion caused by customer misuse are not covered by the
warranty.
To maintain water resistant performance
Carefully note the precautions below to ensure proper use.
• Do not splash water forcibly into the sound output holes.
• Do not fall into the water, and do not use underwater.
• Do not allow the product to remain wet in a cold environment, as the
water may freeze. To prevent malfunction, make sure to wipe off any
water after use.
• Do not place the product in water or use it in a humid place such as a
bathroom.
• Do not drop expose it to mechanical shock. Doing so may deform or
damage the product, resulting in deterioration of water resistance
performance.
• Use a soft dry cloth to wipe off any water that gets on the product. If
water remains in the speaker output holes, the speaker may become
muffled or completely inaudible. If this happens, position the Speaker
holes facing downward, and shake several times to get the water out.
Fresh water, tap water
Liquids other than those above (examples:
soapy water, detergent water, water with bath
agents, shampoo, hot spring water, pool water,
seawater, etc.)