LOGIQ E1 0 Series: Pow er Assista nt B a ttery Op tion
LOGIQ
Viewing Current Battery Status
Click on the battery icon located in the status
Note: If you do not see the battery icon in the status bar then the
battery option is not available on your system.
Detailed battery information will display in the pop up
which includes the battery's current capacity.
Charging the Battery
The standard/extended battery is charged automatically
when the system is connected to the wall outlet via
the power cord and the circuit breaker is turned on. The
battery will charge if the system is powered on or off.
Approximate Charging time (empty to full)
Power Assistant battery- 2.5 hours
Power Assistant Battery Status Icon
bar.
AC unplugged, Battery 90-100%
AC unplugged, Battery 50-89%
AC plugged/charging, Battery 50-89%
AC plugged/charging, Battery 20-49%
AC Plugged/charging, Battery 0-19%
Battery Temperature, Battery Charge
or Communication error
Note: if this icon displays, DO NOT
initiate PA. Contact the Technical
Service Department or local GE representative.
AC unplugged, Battery 20-49%
AC unplugged, Battery 0-19%
AC plugged/charging, Battery 90-100%
Need help?
Do you have a question about the LOGIQ E10 Series and is the answer not in the manual?